Masonry repair
Sweep & inspection
Caps & crowns
Flue relining
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Repair for Ventura Homeowners
A cracked crown, a loose cap, or a firebox that has crumbled at the seams can turn a working fireplace into a real liability. That’s the problem we solve in Ventura: the structural side of chimney care that a routine sweep won’t fix and a general handyman shouldn’t touch. Our technicians have up to 11 years of experience, and every job starts with inspection, not a sales pitch. We show you the condition of your system through photos and a camera inspection, then give you a written scope and flat price agreed before any work begins. You’ll know what’s failing, why it matters, and what it costs before we pick up a tool. If a repair can safely wait, we tell you that too. Call (855) 939-0327 for a free estimate on chimney repair in Ventura.
Chimney Cap Installation
Chimney Cap Installation is the fitting of a screened cover over the top of the flue to keep out rain, animals, and debris while letting smoke escape. You need one if your flue is open to the sky, if you’ve found birds or squirrels in the firebox, or if water drips down the flue during a storm. Ventura Chimney Cleaning measures the flue, matches a cap to the liner material, and bolts it down so wind off the hills doesn’t walk it loose. Most installations run $250-$650 depending on cap style, flue size, and whether the crown needs work first. We quote the price per job before we schedule.
Choosing the right cap style
A single-flue cap protects one opening; a multi-flue cap covers a whole chimney top. The choice comes down to how many flues you have, how much wind your roofline catches, and whether you want the cap to double as a spark arrestor. We bring options that fit the liner you actually have, not a universal size that rattles in the first storm.
Why an open flue matters
An open flue pulls more heat out of the house than a capped one, and it invites every raccoon and starling in the neighborhood to move in. Nesting material doesn’t just block smoke; it’s fuel near a hot flue. A proper cap closes that gap without changing how the chimney drafts.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cap Replacement
Chimney Cap Replacement is the removal of a worn or damaged cap and the fitting of a new one in its place. You need it when the mesh has rusted through, the cap has bent or blown off center, or the old model has started to block the flue it was meant to protect. Ventura Chimney Cleaning checks the flue opening first, clears any nesting debris, then fits a replacement matched to your liner. Most replacements run $250-$650 depending on cap type and how much of the crown needs attention. Because a cap that shifts off-axis can let water straight into the flue, this is the kind of repair we treat as worth doing promptly.
Signs your cap is past its usefulness
Rust-streaked mesh, a cap that sits crooked, or a cap that has pulled free at one corner all point to replacement rather than repair. Rusted mesh can break loose and fall into the flue, where it blocks the draft. If you see daylight through the mesh when you look up the chimney, it’s time.
Matching the cap to the liner
A replacement has to sit flush on the correct flue without pinching or rattling. We take that measurement because an ill-fitting cap lets birds in through the gaps and clatters in high wind. The new cap should sit level and stay put.
Chimney Liner Installation
Chimney Liner Installation is the placement of a new flue liner inside the chimney to contain combustion gases and preserve clearance to combustible framing. You need it when the existing liner has cracks, gaps, or missing clay tiles, or when the liner was never correctly sized for the appliance. Using DuraFlex and Olympia Chimney liner systems, Ventura Chimney Cleaning relines the flue with the correct grade of stainless steel for wood-burning or gas use, then insulates around it where code calls for it. A reline typically runs $2,500-$6,500 depending on liner length, diameter, insulation, and appliance type. We inspect the flue with a camera first and show you the evidence, since relining is one of the biggest costs in chimney work and you deserve to see why it’s needed.
When a liner is truly needed
Cracked tiles or an unlined flue allow heat and gases to reach framing, which is the structural risk liners exist to prevent. A camera view shows the breaks plainly, and that evidence is what should drive the decision. We won’t recommend a reline on a liner that still has integrity.
Stainless grade and sizing
Liner grade and diameter have to match your fuel and appliance; the wrong combination either fails early or drafts poorly. We size the liner to the flue and the appliance so the system vents the way it should. The right liner, the right size, installed once.
Chimney Flashing Repair
Chimney Flashing Repair is the correction of the metal seal at the base of the chimney where it meets the roof, the joint most leaks start at. You need it when you see rusted or pulled flashing, staining on the ceiling near the chimney, or water finding its way into the attic. Ventura Chimney Cleaning reseals or replaces the flashing and ties it back into the roof so rain runs off as it should. Most flashing repairs run $300-$800 depending on how much of the joint needs to be rebuilt and what type of roof you have. Left alone, a flashing leak rots framing and shows up as a stain long after the damage is underway.
Reading the leak
Water that appears at the chimney during rain, not just at the top, usually traces to the flashing or the roof joint above it. We trace it before recommending anything so we’re fixing the source rather than the stain. A proper repair is a permanent fix, not a bead of sealant over an active leak.
Sealing the roof joint
Flashing has to shed water and stay sealed against driving rain through the years. We use materials that match the roof and the climate rather than caulk-and-pray patches. If the joint below the flashing has rotted, we tell you and quote that too.
Chimney Crown Repair
Chimney Crown Repair is fixing or rebuilding the concrete cap at the very top of the chimney, the surface that sheds rain off the brick and flue below. You need it when the crown has cracked, crumbled at the edge, or pulled away from the flue. Ventura Chimney Cleaning repairs small cracks and rebuilds worn crowns with a properly sloped surface so water runs off instead of pooling. Crown repair typically runs $400-$1,500 depending on the extent of the rebuild and whether the crown is cast or formed. A sound crown is the cheapest insurance your masonry has against water working into the joints above the roofline.
Reading crown cracks
Hairline cracks are common; a crack you can slide a coin into, or a crown that’s separated from the flue, is failing. Once water reaches the top of the flue it can migrate into the liner and the surrounding masonry. We report the extent and let the photos make the case.
Slope and material
A crown has to slope so water runs off rather than sitting on it. We rebuild with that slope worked in, not just patched flush. Given the summer sun and dry stretches Ventura gets, a crown that holds up to heat cycling lasts longer than a thin patch.
Chimney Repair Companies
Chimney Repair Companies vary widely in what they can actually do, and that difference matters when the work moves past a sweep into structural repair. You need to compare companies when your chimney needs masonry work, a reline, or a crown rebuild, since not every operator is equipped for it. Ventura Chimney Cleaning handles sweep, repair, and inspection under one roof, works with Gelco and Famco materials, and does the chimney exclusively rather than splitting attention across plumbing and roofing. Repair work typically runs $250-$6,500 depending on scope, and we set the price per job by written estimate. Ask for inspection evidence and the actual scope before you hire anyone.
What to ask before you hire
Ask what the company is set up to repair, not just sweep, and ask to see the inspection evidence that justifies the work. A chimney-only specialist can speak to liners, crowns, and fireboxes in the same visit. Avoid outfits that recommend a reline on the strength of a flashlight glance.
Spotting a sweep-only operator
A sweep-only operation can clean a flue but will typically stop short of masonry and relining, leaving you to find another contractor. That gap is where bids start to balloon. One company that can inspect, clean, and repair saves the coordination and the second opinion.
Chimney Masonry Repair
Chimney Masonry Repair is the rebuilding or repointing of the brick, mortar, and stonework in the chimney stack, the structure that holds everything else up. You need it when mortar is crumbling, bricks are spalling, or the stack has pulled away from the roof. Ventura Chimney Cleaning repoints loose joints, replaces damaged brick, and, where the firebox or flue has deteriorated, uses HeatShield to restore the interior surface that masonry alone can’t fix. Masonry repairs typically run $500-$3,000 depending on how far up the stack the work goes. Mortar takes years to crumble and only shows up when a joint opens; catching it early keeps the job small.
Mortar and spalling brick
Crumbling mortar is the first sign, and spalled bricks follow once water gets in behind the face. Repointing before the bricks break is a far smaller job than rebuilding the stack. We inspect the whole height of the stack, not just the parts you can see from the yard.
Restoring the firebox
Firebox mortar that has cracked and flaked away can’t be solved by sweeping the flue. With HeatShield, deteriorating fireboxes and liners get a durable resurfacing rather than a patch. That’s repair the standard sweep never touches.
Brands We Service
We work with HeatShield, a system for restoring worn fireboxes and flue liners by resurfacing the interior rather than rebuilding it entirely. We know where HeatShield performs best and where a full reline is the more honest answer. We also handle DuraFlex and Olympia Chimney liner systems and know which grade and sizing suits each appliance. We fit Gelco and Famco products into repairs where they belong, using professional-grade materials from brands chimney specialists trust rather than hardware-store substitutes.
What matters is applying the right brand to the actual failure, not the one that’s easiest to reach. Whether you have HeatShield restoration work, a DuraFlex, Olympia or Gelco lining job, or a Famco component in a repair, or any other make at all, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke rolling back into the room. A fireplace that smokes into the house rather than up the flue points to a blockage, a failing liner, or a draft problem. None of those gets better on its own. A quick inspection shows which one it is.
- Water staining on the ceiling or chimney breast. Stains near the chimney usually trace to failing flashing or a cracked crown. Every rain cycle widens the damage behind the wall. Get it looked at before the problem spreads into the framing.
- Cracked or missing mortar below the roofline. Crumbling joints let water into the brick and weaken the stack. Repointing early is far cheaper than rebuilding a section later. If bricks are loose, keep people clear of the area.
- A strong creosote smell, or smoke in the flue on off days. Heavy creosote buildup or a flue that no longer drafts properly is a fire risk worth taking seriously. A sweep and inspection tell you how much has built up and whether the flue is sound.
- A cracked firebox or spalling at the flue top. Firebox damage and spalled masonry at the crown both compromise the system’s ability to contain heat. A trained chimney tech should look at the firebox, not a general handyman. Do not burn until it has been checked.
Our Process, Step by Step
- 1
Book the visit and set the scope. We take the details of your fireplace or stove and what you’re seeing, then schedule an inspection. The goal is to inspect first and recommend second, so nothing gets quoted before we’ve looked.
- 2
Inspect with camera and photos. We run a camera through the flue and photograph the firebox, crown, cap, flashing, and masonry. You see the same evidence we do. That’s the difference between a real diagnosis and a guess.
- 3
Sweep the flue where repair is needed. Even a repair job starts with a clean flue so the work can be seen and done properly. Creosote gets cleared before any lining or masonry work begins.
- 4
Present the written scope and flat price. We lay out what’s failing, what can wait, and what it will cost. The price is agreed before any work starts, and the written estimate is the number that sticks.
- 5
Do the repair and verify the system. We install the liner, crown, cap, flashing, or masonry, then check the finished system and leave you with the documentation. Sweep, repair, inspect: one company, one call.
How Much Does Chimney Repair Cost in Ventura?
Chimney repair in Ventura runs from a few hundred dollars for a cap or flashing fix to several thousand for a reline or masonry rebuild, depending on where the failure is and how far it spreads. A typical chimney crown repair runs $400-$1,500, a chimney cap installation runs $250-$650, and chimney flashing repair runs $300-$800. A chimney reline is the larger job, typically $2,500-$6,500 depending on liner length, sizing, and insulation. Masonry repointing and brick repair usually fall in the $500-$3,000 range depending on how high up the stack the work goes. The written estimate is the number that applies.
What moves the price: how much of the chimney is affected, the height of the stack, whether the repair touches the roof, and the grade of material required. Liner diameter and appliance type change the material cost more than labor does. Where we can save you money is by scoping the job honestly and telling you what can wait. Where we won’t: recommending a smaller repair that fails in a year. A free estimate includes a camera inspection, photos, and the written scope, with flat pricing agreed before we book.
You don’t need to guess at your chimney’s condition. Call (855) 939-0327 today for a free estimate, and see the evidence before you spend a dollar.
Our Service Area Near Ventura
We send technicians across Ventura County and the coast. If you’re in El Rio, Port Hueneme, or Channel Islands Beach, visit our page for chimney repair in El Rio or chimney repair in Channel Islands Beach to see local details. Inland, we cover Oak View, Mira Monte, Meiners Oaks, Ojai, and Santa Paula, and we reach Carpinteria along the coast. Chimney repair in Ventura typically starts with a quick inspection, and we schedule around you. Call (855) 939-0327.
Serving Ventura, CA – Our Local Coverage Area
We serve Ventura and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Repair in Ventura
Chimney repair is the work of fixing the structural and safety components of a chimney: the liner, crown, cap, flashing, firebox, and masonry. It’s not the same as a sweep, which clears creosote, though the two are linked. If a component has cracked, rusted, or shifted, repair restores it rather than cleaning around it. Call (855) 939-0327 for an estimate.
Most chimney repairs take a single visit for a cap, flashing, or crown, and longer for a reline or masonry rebuild. The written estimate states the timeline once we’ve inspected, so there are no surprises. We schedule the work around your needs. Call (855) 939-0327 to book.
Chimney repair in Ventura typically ranges from about $250 for a small cap or flashing fix to $6,500 for a full reline. Typical crowns run $400-$1,500, flashing $300-$800, and masonry repairs $500-$3,000 depending on scope. The written estimate sets the final price. Call (855) 939-0327 for an exact quote; estimates are free.
Yes, we work with HeatShield firebox and flue restoration and DuraFlex liner systems among other professional brands. Our technicians have up to 11 years of experience and can tell you which restoration fits your chimney. We assess first and recommend second. Call (855) 939-0327 to schedule.
Yes, same-day service is available when we can dispatch in your area. For the phone line, we answer 24/7, and we dispatch Sunday through Friday from 7am to 7pm; we’re closed Saturday. A call outside those hours is booked into the next opening. Call (855) 939-0327.
We stand behind the work we do, and any warranty terms are stated in writing on your estimate so you know exactly what’s covered. We don’t invent terms over the phone, and we put the scope in writing before the job begins. Call (855) 939-0327 to review the details.
Clear the hearth area, move anything breakable off the mantle, and let us know if the fire has been used recently so we can allow cooling time. If we’re working on the roof, make sure we can reach the chimney and point out any access issues. When we call to confirm, we’ll give you the specifics for your job.
Schedule Your Chimney Repair Service in Ventura Today
Whether your issue is a cracked crown, a rusted cap, a leaking flashing, or a liner that needs replacing, we’ll inspect, show you the evidence, and give you a flat written price before starting. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. Call (855) 939-0327 for a free, no-obligation estimate on chimney repair in Ventura.
Written by the team at Ventura Chimney Cleaning.