Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Inspection for Ventura Homeowners
A chimney can look fine from the living room and still be hiding cracked tiles, a blocked flue, or a failed liner joint you can’t see. That’s the gap a professional inspection closes, and it’s why we treat inspection as a service in its own right rather than a quick glance before a sweep. Our technicians have up to 11 years of experience, and they work on chimneys only, using professional-grade materials from brands like HeatShield when a repair turns out to be needed. Same-day appointments are often available in Ventura, so you’re not waiting a week to find out whether your fireplace is safe to use. Call (855) 939-0327 to book a condition report. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Fireplace Inspection
A fireplace inspection is a focused look at the firebox, damper, smoke chamber and the first stretch of flue above the fire, the parts of your system that take the most heat and show the earliest signs of wear. You need one if you’ve just bought a home in Ventura and don’t know the fireplace’s history, if it’s been more than a year since anyone looked at it, or if smoke has started drifting into the room. We run the inspection independently of any cleaning, so you get an honest read on condition before you commit to work. Fireplace inspections typically run $125 to $250 depending on access and whether camera work is needed, and a written report is included. If you need repairs afterward, those are quoted separately from the same visit.
What the Firebox Reveals
Masonry fireboxes erode in patterns that tell us a lot about how hard the fireplace has been used. Spalling brick, open mortar joints and a crumbling rear wall all point to heat damage that will only worsen with the next fire. When restoration is the right call, HeatShield resurfacing can rebuild the firebox face without tearing out the surrounding masonry.
Damper and Smoke Chamber Check
A damper that won’t seal lets heated room air escape up the flue year-round and lets cold air down when the fireplace is idle. The smoke chamber above it, with its corbelled walls, collects creosote in places a brush can miss. We inspect both by hand and note anything that needs attention in the report.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Inspection Services
Chimney inspection services cover the full system, from the crown and cap at the top to the firebox and cleanout at the bottom, plus the exterior where it meets the roofline. You need a full inspection before the first fire of the season, after any chimney fire or earthquake shaking, when you’re buying or selling a home in Ventura, or when you’ve changed what you burn, say from wood to a gas log set. We offer inspection on its own with no cleaning attached, so homeowners who want a condition check without a sales pitch can get exactly that. Chimney inspection services typically cost $125 to $400 depending on the level of inspection and whether a camera is used. The written findings set out what needs work now, what can wait, and why.
Inspection Without a Cleaning
Plenty of homeowners want to know the state of their chimney without booking a sweep at the same time. That’s a perfectly reasonable request, and we handle it as its own appointment. You get the same thorough look and the same written report, and nothing gets added to the job unless you ask for it.

What the Report Includes
Our reports describe what we found in plain language, note the condition of each component, and flag anything that affects safe use. Photos are included where they help show the problem. If work is recommended, the reasoning is right there in the document so you can weigh it on your own time.

Chimney Flue Inspection
A chimney flue inspection concentrates on the passage your smoke travels through: the liner, its joints, offsets, and any gaps or cracks that let heat and gases reach the structure around it. You need one when you’ve had a chimney fire, when the appliance has been changed or replaced, when there’s been a long gap between fires, or when a sweep notices something the brush can’t resolve. We check liner condition with a camera and by hand where the flue allows, then report on whether the liner is sound, deteriorating, or missing entirely in older Ventura homes. A flue inspection generally runs $150 to $350, and if the liner needs attention we work with DuraFlex and Olympia Chimney components to match the right replacement to your flue’s size and the appliance you burn.
Liner Condition and Joint Integrity
Tile liners crack at the joints first, and a stainless liner fails at its seams if it was installed poorly or has been overheated. Both create a path for heat and carbon monoxide to reach framing or masonry. We examine the full run, not just the top few feet.
Blockages and Obstructions
Nests, fallen mortar, and leaves all narrow a flue and change how it drafts. In Ventura’s dry months a flue can sit unused long enough for animals to move in. We confirm the flue is clear before anyone lights a fire.
Chimney Fire
A chimney fire is what happens when creosote buildup inside the flue ignites, and it can burn hot enough to crack tiles or warp a metal liner even when you never see flames from outside. You need an inspection after any suspected chimney fire, and urgently if you heard a roar, felt a vibration, or saw sparks or smoke escaping joints. Many chimney fires in Ventura go unnoticed because they stay small and self-extinguish, which is exactly why a post-fire inspection matters: the damage is often invisible until the next fire. We examine the flue, firebox and surrounding structure and report on what the heat affected. Inspections after a fire typically cost $150 to $400 depending on the damage and camera work needed.
Signs a Fire Happened
Puffy, honeycombed creosote, discolored or warped metal, cracked tiles and heat-damaged mortar all point to a fire inside the flue. A strong smell after burning, or a draft that suddenly behaves differently, is worth checking. We confirm or rule out damage rather than guessing from symptoms.
Damage That Follows
A fire can leave the flue structurally sound enough to look fine while the liner has lost its ability to contain heat. That’s the failure mode that turns into a house fire months later. Our inspection determines whether the liner still does its job or needs replacement.
Level 2 Chimney Inspection
A Level 2 chimney inspection is the thorough visual and camera-based examination recommended whenever a home changes hands, after an event like a chimney fire or earthquake, or when you’re changing the appliance or fuel type. It goes beyond what you can see from the hearth, covering accessible portions of the attic, crawlspace and exterior, plus a video scan of the flue interior. If you’ve bought a home in Ventura and the seller had no records, this is the inspection to start with. A Level 2 inspection typically costs $250 to $400, and the report gives you the full picture in one appointment. Repairs, when they’re needed, are quoted separately and explained in plain terms.
When Level 2 Is the Right Call
Real estate transactions, a new appliance, a change from wood to gas, and any significant event affecting the chimney are the standard triggers. In each case, components you can’t reach from the firebox are the ones most likely to hold the problem. Camera access is what makes those components visible.
What Gets Examined
We check the crown, cap, flashing, exterior masonry or siding at the chase, the attic penetration and the flue interior top to bottom. The firebox, damper and smoke chamber are covered too. Anything that affects safe operation gets recorded with a recommendation.
Chimney Leak
A chimney leak is water getting in somewhere in the chimney assembly, and it rarely starts where the stain shows up on your ceiling. Common entry points are a cracked crown, failed flashing where the chimney meets the roof, an open or rusted cap, and missing mortar joints in the exterior masonry. You need an inspection when you see damp patches, white staining on brick, rust on the firebox or damper, or water in the firebox after rain. Ventura’s wet winters are short but they do deliver, and a small leak that runs for years rots framing and rusts the damper assembly. Leak inspections typically run $150 to $350, and repair pricing depends on what the water is getting through. We find the source before we quote anything.
Tracing the Entry Point
Water travels, so a stain on the ceiling doesn’t tell you where the leak began. We work from the top down, checking the crown, cap, flashing and mortar for the actual opening. That stops the cycle of patching the wrong spot.
Repairs That Stop the Water
Crown repairs, flashing work, cap replacement and mortar repointing handle most leaks we find. Getting the right repair the first time matters more than getting it done fast. We quote the work in writing before it starts.
Chimney Camera Inspection
A chimney camera inspection uses a video scope run down the flue so we can see the liner’s whole length instead of guessing from the top and bottom. You need one whenever a liner is suspect, after a chimney fire, during a home purchase, or when a standard visual check turns up something worth confirming. We use the camera as standard practice on flue and Level 2 work, and we record what it finds so you can see the evidence yourself. Camera inspection generally falls within the $150 to $400 range depending on how much of the system needs scanning. That way, nothing gets recommended that you can’t verify.
What the Camera Finds
Hairline cracks, missing mortar at tile joints, gaps at offsets, and sections of liner that have been damaged or poorly installed all show up clearly on the screen. So do blockages and heavy creosote glaze that a brush might not fully remove. We walk you through the footage.
Why It Prevents Guesswork
Liner replacement is significant work, and it should never rest on someone’s hunch. When the camera shows an intact liner, we say so, even if it means the job goes away. That’s the standard we hold ourselves to on every Ventura inspection.
Brands We Service
We work with professional-grade products from six lines that chimney specialists use every day: DuraFlex, HeatShield, Gelco, Olympia Chimney, Famco and Copperfield. We choose the material to fit your flue, your appliance and the repair at hand. DuraFlex and Olympia Chimney liner components are the right fit for relining projects where the flue has lost its integrity. HeatShield resurfacing restores fireboxes and flue sections that are deteriorating but still structurally usable, work a standard sweep can’t handle. Gelco, Famco and Copperfield round out the toolkit, giving us options for crowns, dampers, and related repairs.
We service these systems and know where each one tends to wear out, which helps us recommend the right repair the first time instead of patching and hoping. Whether you have HeatShield-restored masonry, a Gelco component, an Olympia Chimney liner or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Smoke backing into the room. A fireplace that used to draft fine and no longer does usually has a blockage, a damaged flue, or a pressure problem. It’s a clear sign the flue needs to be checked before the next fire.
- Strong creosote smell in warm weather. That odor means heavy buildup, and buildup is what fuels chimney fires. It needs a look before burning season returns.
- Water in the firebox or rust on the damper. Both mean moisture is getting in somewhere above. Left alone, it damages the damper and the masonry around it.
- Cracked or crumbling firebox masonry. Spalling brick and open mortar joints let heat reach the structure behind them. A firebox inspection tells you how much repair the damage needs.
- You just bought the house. Without records, you don’t know the condition of the liner or when the chimney last saw a professional. A Level 2 inspection gives you a starting point.
Our Process, Step by Step
- 1
We talk through the history. What you burn, how often, the last time the chimney was serviced, and any symptoms you’ve noticed. That conversation shapes where we focus first.
- 2
We inspect from the outside in. Crown, cap, flashing, and the exterior masonry or chase get checked before we come inside, since exterior problems often explain interior symptoms.
- 3
We examine the firebox and damper. Hand inspection of the firebox, damper and smoke chamber reveals erosion patterns and sealing problems. This is where Fireplace Inspection findings usually show up.
- 4
We run the camera if needed. For flue and Level 2 work, the video scope shows the liner’s full length. You see the findings on-screen, and we record what matters for your report.
- 5
We leave you with a written report. It lists what we found, what needs work now, what can safely wait, and the reasoning behind each recommendation. Nothing gets recommended that the camera or our hands didn’t confirm.
How Much Does Chimney Inspection Cost in Ventura?
A typical fireplace or standard visual inspection in Ventura runs $125 to $250 depending on access and whether camera work is included. A flue inspection runs $150 to $350, a Level 2 inspection with a camera scan and attic or crawlspace access runs $250 to $400, and post-fire or leak investigations land in the $150 to $400 range depending on what needs to be examined. Sweeping, when it’s part of the visit, adds $150 to $300 based on the flue’s condition and length.
What affects the price: the level of inspection, whether the camera is used, roof access, how much buildup is present, and whether the appliance is wood, gas or pellet. A straightforward inspection on an accessible chimney sits at the low end. A Level 2 on a tall chimney with attic access and heavy creosote sits higher.
How to avoid overpaying: ask for inspection as a standalone service first, then let the findings drive the conversation. Repairs should be quoted in writing with the reason for each one, and anything you can’t verify with your own eyes is worth a second look. That way you know the liner or crown work you’re paying for is actually needed.
What’s included in an estimate: an inspection, a written report, and a clear price for any recommended work. Estimates are free, and the written quote sets the final price. Call (855) 939-0327 – estimates are free.
Our Service Area Near Ventura
We serve homeowners across Ventura and the surrounding communities. Whether you’re in the city proper or out toward El Rio and Channel Islands Beach, we can schedule your inspection without a long wait. Fast dispatch runs 7am to 7pm, Sunday through Friday. If you’re a bit further out, say toward Oak View or Mira Monte, call and we’ll confirm availability for your address. We know the area and can usually get you on the schedule quickly.
Serving Ventura, CA – Our Local Coverage Area
We serve Ventura and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Inspection in Ventura
A chimney inspection is a professional examination of your entire chimney system: firebox, damper, smoke chamber, flue, and exterior components like the crown and flashing. It determines whether your chimney is safe to use and identifies damage before it becomes a bigger problem. Some inspections also include camera scanning of the liner, which shows what the eye can’t reach. Call (855) 939-0327 to book one.
A fireplace inspection typically takes 30 to 45 minutes, while a full Level 2 inspection with camera work runs 60 to 90 minutes. The time depends on roof access, how many components need examining, and whether the attic or crawlspace has to be checked. A post-fire inspection can take longer if damage needs careful documentation. Call (855) 939-0327 for a scheduling estimate.
A typical chimney inspection in Ventura runs $125 to $400 depending on the level and whether a camera is used. A basic fireplace inspection sits around $125 to $250, a Level 2 inspection runs $250 to $400, and flue or camera inspections fall in between. The written estimate sets the final price. Call (855) 939-0327 for an exact quote – estimates are free.
We service systems from the brands we work with, including HeatShield, DuraFlex and Olympia Chimney liner components, along with the other product lines we use for repairs. If your system was installed with a brand outside our list, call and we’ll confirm whether we can help. We can give you a straight answer before you book. Call (855) 939-0327 to check.
Same-day service is often available in Ventura, though it depends on the schedule that day. We answer 24/7, and fast dispatch runs 7am to 7pm, Sunday through Friday. A call outside those hours is booked into the next opening. Call (855) 939-0327 to see what’s available.
We don’t publish warranty terms because coverage depends on the specific repair, so we discuss it when we quote the work. Ask before the job starts and we’ll tell you exactly what’s covered. Doing the right liner or repair the first time reduces the need for a callback. Call (855) 939-0327 with questions.
Clear the hearth and the area around the fireplace, and make sure we can reach the attic or crawlspace access if that’s part of the visit. If you have records of past chimney work, have them ready, since they help us understand what’s been done. Avoid lighting a fire for at least 24 hours before the appointment. Call (855) 939-0327 to schedule.
Schedule Your Chimney Inspection Service in Ventura Today
An inspection tells you what your chimney actually needs, so you can burn wood with confidence or find a problem before it gets expensive. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. Call (855) 939-0327 for a free, no-obligation estimate and a written report you can read for yourself.
Written by the team at Ventura Chimney Cleaning.